Tuesday 24 May 2011

Union Special 39200AE... Sussed !!!

Since i bought my Union Special 39200AE Sewing Machine, ive been on the hunt everything about it. I have managed to find the instructions, which have some amazing hand sketches of every single component.

But what i really wanted to know is how to thread the thing... There seems to be nothing on the Internet about it, just a few others asking the same question... So i have made it my mission to work it out, and post it up online... There have been two clues, which have aided me. To my delight, 2 images from other sellers selling the same machine have come my way - The image on the right im confirming is not correct - but the one on the left is bang on….

I have made things easy - each cone / thread is a different colour, and i have taken picture at each process - and numbered each step.. The Middle 2nd thread is a right pain to thread, esp as its goes inside the machine. I took me a while to figure it out - If the below images are too small, download a nice handy PDF here:

http://www.megaupload.com/?d=Z8FYFVD4

Enjoy ! You are using a Union Special Machine that was made in 1920 !

14 comments:

  1. Hello, congratulations for the post, very interesting!
    I have some questions:
    What is the price for a machine like this? What does it cost to restore it? is It used to sew denim or other fabrics?

    ReplyDelete
  2. Hi I was lucky, i got my 39200, for $400USD, very cheap, as they normally go for $1000-$2000... shipping cost me another $200
    to get a new table, about $200-$300 USD, with motor and new light etc... plus cost for someone to service it... ( i cheated at the begining and slapped an mini singer motor in the back but its on a table now.
    I also got replacement Looper needles just in case ( about $30-$50 each) the main needles are easy to find, if u know a good sewing machine specialist, other wise ebay again... it can be used to sew many fabrics, and its a over locker.. but ill be using it for denim :0 - let me know how it goes and if u need any help hunting down yours - regards Mohsin

    ReplyDelete
  3. Hi,thanks for the answer, I'm looking info for create a small production of selvage Denim with old machines,but take info is difficult.
    On the web there aren't info about the Union S.39200 except for your precious information.
    I would be happy to see how this machine works on denim,because I could buy It for a good price,if you have any photos of the works with 39200...please post It.
    Thanks,regards Pureindigo!!!

    ReplyDelete
  4. Dear Sir, my name is Claudia, it took me a while to find any information about this machine, was a friend and I sold it very cheap, since my hobby is to cook and create things ... and really made ​​me very happy to find this tutorial, however be half as page and you no longer recommended. Ested could be kind enough to send me this tutorial or PDF, a program working with children and must do the disfracez ... to cut costs and we will make ourselves. Thank you in advance, I inform you that do not speak or write English, so a translator to write Use ... my email is claudiaandrea.rojas @ gmail.com

    And I congratulate you for taking the time to upload and share YOUR machine information.

    ReplyDelete
  5. Posiadam overlock Union-Specjal 38200
    Sprzedam za pare groszy [300$}
    Prosze o odpowiedz
    e-mail bozenao54@o2.pl

    ReplyDelete
  6. Hi mohsin,

    cannot find needle sizes for this machine,
    do you remember which ones you purchased from ebay?

    cheers

    ReplyDelete
  7. UY 150 GAS, UY 150 GS, 1373, UOX150 G

    if anyone was interested

    ReplyDelete
  8. I want to sale Us 39200 AE overlock machine.
    Any one interesting?

    ReplyDelete
  9. That realy was made in 1920?

    ReplyDelete
  10. hallo
    sell overlock Union 39200.

    video here

    https://youtu.be/eOBtUKBCkOo

    ReplyDelete
  11. Howdy Moshin, I recently got a hold of the 39200F and can confirm this subtype has a different thread path for the lower looper much like the example on the right in your photo of the two. Would you happen to have a copy of the service manual for the 39200? All of your info and knowledge is much appreciated.

    ReplyDelete
  12. I just inherited one of these machines and i appreciate your pictures! Would it be possible for you to update the link, please? The one it's linked to now is dead. Thank you so much.

    ReplyDelete
  13. Comment faire pour changer les,couteaux

    ReplyDelete
  14. Comment faire pour charger les couteaux

    ReplyDelete